Dr. Matt Borloz (Carilion Clinic) recently emailed me his recent trick in fixing a persistently leaking paracentesis site. Read about his experience:
A patient with advanced alcoholic cirrhosis with ascitic fluid leaking from a paracentesis puncture site from a procedure done 2 days prior. Dermabond had initially been applied post-procedure, but it had come loose, and ascitic fluid had been saturating dressing after dressing.
I initially tried a figure-eight stitch with no luck. In fact, this just made a couple more leaking holes. I had made the problem worse. I followed this with another trial of Dermabond. Now the problem was that the field just kept getting wet, and the Dermabond would not dry.
Trick of the Trade:
- Use a tissue adhesive to occlude the puncture site.
- Apply high-flow oxygen via nasal cannula to dry the glue.
I hooked a nasal cannula up to oxygen and turned it all the way up to act as a concentrated stream of directed air. This both dried the ascitic fluid and hastened the solidification of the Dermabond. I applied multiple layers. It worked great. No more leak.
